VAG COM 17.1 VCDS 17.1 HEX+CAN-USB Interface For VW Audi Seat Skoda
VAG COM 117.1 VCDS 17.1 Crack Cable V17.1 VAG Diagnose Cable support all systems diagnostics including K1,K2,CAN,UDS.
There are 3 languages：German/French/English，you could choose it when you purchase it.
VAG COM VAG Diagnostic Tool :
Software Version: VCDS 17.1
Firmware Version: 1.96
Supported Vehicle List: For AUDI VW SEAT SKODA
Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B
System requirement: Windows XP, Vista, 7, 8, 8.1(32-bit and 64-bit)
(It does not support Windows 95, 98, ME, and NT4 operating system)
VAG COM VCDS 17.1 highlight:
High quality original brand new IC production, With the upgrade brush program interface
After installation has been activated to support all systems diagnostics (including K1,K2,CAN,UDS)
VAG COM VCDS 17.1 PCB Board Display:
VCDS 17.1 New added functions:
1.Support for MLB2 platform cars (HEX-NET interface recommended)
2.Support for 2016 and early model cars
3.Greatly expanded the amount of DTC Freeze-Frame data dsiplayed
4.Improvements in Advanced Measuring Value Selection Window
5.Display of factory identifiers instead of arbitrary location numbers
6.Support for Six-Digit security access codes
7.HEX-NET Turbo and other speed optimizations
8.Optimized low-level timing routines and CPU core affinity
9.Major firmware enhancements for HEX+CAN and Micro-CAN interfaces
10.Improved UDS mapping speed and reliability when subchannels are present; progress indicators.
11.Fixes SRI reset in newer Crafter instruments.
12.New ASAM data and Label Files
13.Support vehicle list: For AUDI VW SEAT SKODA
Vagcom 17.1 New Features:
Auto Scan 1001.01
1. Control module unit information
2. Read fault codes 004.01
3. Output test 005
Selective output test 005
4. Basic settings 006
5. Clear DTCs 004.10
6. Close control module 022
7. Pairs of coding control module (brush hidden) 007 (service 1A)
008 (Service 22) From the station control module 007 coding (service 1A)
008 (Service 22) Read measured value block 08 010.02 (KWP1281)
8. Advanced measurement reading
9. channel read 010.01
10. matching 012 014 (long)
11. Log (Known under KWP-2000 * Coding II) 015.01
12. View readiness 020.01 Guided ready state settings
13. security access 015.02
14. All supported DTCs
15. Common OBD-II function
16. Fault environmental data
17. Dual K-Line Support 7-PIN code 020.07
18. Upgrade to the latest fault code library
19. Direct CAN line diagnosis (Need to support diagnostic cables CAN line diagnosis)
20. Modes of transport 1001.03 (on)
1001.04 (off) (Need to support diagnostic cables CAN line diagnosis)
21. Advanced measurement block
22. Support for dual engine control module
Compared to the previous version, the VAG 17.1 main changes is BUG fixes and improvements.
Vagcom 17.1 Basic functions
00 Auto Scan
01 control module unit information
02 read fault codes
03 Output Test
Selective output test (only for KWP-2000 *)
04 Basic settings
05 clear DTCs
06 Close Control Module
07 pairs of coding control module
Slave control module for coding (only for KWP-2000 *)
Read measured value block 08
09-channel read (applies only to KWP-1281 *)
11 Log (known under KWP-2000 * Coding II)
15 View Ready
16 security access (only for KWP-2000 *)
18 All supported fault codes (only for KWP-2000 *)
33 Common OBD-II function
Vagcom 17.1 Using Guide:
Downloaded VCDS software installation file, follow the steps to install the software correctly VCDS,You must VCDS software installed on your computer's hard drive!
If you run directly from other media VCDS software, the software may not run correctly
You can use a CD or USB flash drive to copy files to install VCDS on your computer hard drive you want to install, and then install it.
The appropriate diagnostic cable to connect the computer to the vehicle and turn the ignition switch of the vehicle, but it is not necessary to start the engine.
Click the [System Configuration], and then select the correct communications port
Click [Test] to confirm VCDS program can use the correct communications port, find diagnostic cables
Then click [Save]
You can now use all the features of the program VCDS. Ensure VCDS software can reliably access all the control modules that you have a vehicle to view the fault code. See the VCDS diagnostic system for vehicle applications list
VCDS 17.1 Packing List:
1 x Vagcom 17.1 diagnostic cable
1 x CD with VCDS 17.1 software
VCDS 17.1 FAQ:
Q: PC internect connection?
A: yes,but not suggest.
Q: run RT software directly?
A: no,run modified software from us,working perfectly same to RT software.
Q: VCDS 17.1 is long coding full functions?
A: yes.full functions.
Q: change PC time?
A: no need.
Q: what is VAG 17.1 inside main chips ?
A: Chip Edition: ATMEGA162 + FT232RL + L9637D + 16V8B
Q: VCDS 17.1 can support all systems ?
A: yes, including K1,K2,CAN,UDS
User Comment(Total 2 User Comment Num)