TLT250AT clearfloor lift

TLT250AT clearfloor lift

This machine is applicable for the lifting of various small and medium-sized vehicles with total weight below 5.0t in garage and workshop

Feature
1.The cable and oil pipe are fully concealed, with decent and elegant appearance.
2.Designed based on the international standard, meeting the demand of the garage and workshop.
3.Top limit switch, effectively protecting the vehicle from overhead collision.
4.Dual hydraulic cylinders drive, stable lifting and lowering.
5.Automatic full-scope safety lock, safe and simple in operation.
6.Adopt two steel cables for equalization, force two carriages to move synchronously, and effectively prevent the vehicle from tilting.
7.Lowest height of lifting pad is 110mm, good for repairing low chassis or low profile car.

Specification
Rated capacity (kg) 5000
Lifting height (mm) 1900
Lifting time 50
Lowering time 40
Motor power (kw) 3
Passagge width(mm) 2500
Overall width(mm) 3560
Overall height(mm) 4150

Spare Parts
1 TLT250AT powerside column

2 TLT250AT offside column

3 TLT250AT Extension column

4 Bottom cover for column

5 Upper sheave

6 Returning ring 25

7 Connecting bracketⅠ

8 Connecting bracketⅡ

9 Reinforced connecting plate

10 Power unit bracket

11 Pin, 3x26

12 Steel cable assembly,L=11130

13 Guide block for steel rope

14 Inner top beam

15 Outer top beam

16 SpacerⅡ

17 Long rod axle

18 Long rod

19 Protection cover,L=1800mm

20 Asymmetric axle

21 Spacer I

22 Symmetric axle

23 Limit switch box assembly

24 Inner cover of column

25 Pump unit(China-made),380V/50HZ/Manual override/12L

26 Hydraulic hose

27 Hose connecting to cross beam,L=6110

28 T fitting,M18*1.5

29 Hose,L=930

30 Control flow fitting assembly
31 Seal gasket