ALL-100 / ALL-100P Universal Programmer
1:ALL-100 family supports device programming for variety types of device covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. Most of programmable devices in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA package types can be programmed on a DIP-48 Programming Module directly or through an appropriate ADAPTER/CONVERTER.
2:ALL-100 family features high-tech pin drivers to provide excellent programming capabilities at high speed, high reliability and high expansion flexibility. All pin drivers of ALL-100 family are fully programmable to meet modern programming /testing needs including newly released low voltage devices in the market. High speed USB port is provided to connect to the majority of notebook or desktop PC runs on Windows 98se/Me/2000/2003 Server.
3:ALL-100 can be either used as a powerful universal programmer or upgraded to be an ALL-100G Gang Programmer to work with various types of dedicated Gang Programming Modules by just adding the 4th pin driver card into ALL-100 base unit. The big brother ALL-100G4 is composed of 4 units of ALL-100G in a single box for helping production lines to achieve maximum programming capacity with minimum setup. Due to state-of-the-art design, ALL-100 family is able to satisfy your device programming needs from the very beginning engineering phase to small production stage all the way through mass production.
Utilize flexible pin drivers to get accurate waveforms, high programming speed plus over current protection, self diagnostic etc. ensures ALL-100 excellent performance.
Wide Devices Coverage
Wide rage of programmable devices from 8 pins up to 300 pins covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc. in DIP, SDIP, SOP, SSOP, TSOP, PLCC, QFP, or BGA etc. package types.
Inherit Adapter/Converter from ALL-series
Over 500 ADAPTERs, 150 CONVERTERs can be used with single socket programming module or Gang Programming Module to ensure your capital investment retained
Easy to Use
Runs on Windows. After master read or file download from PC, user only needs to select function from Menu and then press YES key on programmer to start program function. Operation is very easy.
High Expansion Flexibility
Standard DIP48 Module with over 500 ADAPTERs, 150 CONVERTERs for single site programming or various types of multi-site Programming Module can be used to ensure your capital investment retained.
Utilizing proven ALL-11 technology, the programming quality is getting perfect.
Get AT3-300 Automated Programming solution
Resolve your mass production programming issue at engineering stage.
Release New Device Support via Internet Weekly
Your future needs will never be neglected after purchasing.
World Wide Service
Distribution channel covers 35 countries worldwide
Your problem could be taken care anywhere around the world
Pin Count : from 8 pins up to over 300 pins
Device Type: covering EPROM, EEPROM, Serial PROM, FLASH, PLD/CPLD/FPGA, MPU/MCU, etc.
Default - DIP48 ZIF socket
Others - SOP, TSOP, PLCC, QFP, MLF, SDIP etc. through dedicated multi-socket Programming Modules (for ALL-100P)
Controller - 16 bits high-speed controller with big sized FPGA & CPLD
YES Key - Press for operation
Indicators - GOOD LED
1x USB port
Data Transfer Rate
USB 1.0/1.1 : 12 Mb/S
USB 2.0 : 480 Mb/S
Load file, Read Master, Program, Verify, Auto, ID Check, Checksum, Blank Check, Erase, Secure, Protect/Unprotect, Edit, Function Configuration, Self Test
Host Computer Requirements
An Intel Pentium or compatible processor with 32MB of RAM
At least one USB port is available (V 1.0/1.1/ 2.0)
5 MB free hard disk space with Windows 98se/Me/2000/2003 Server operating system
AC voltage - 100 - 240 VAC.
Frequency - 50 - 60 Hz
Power consumption - 0.5 A Rating
L x W x H - 260mm x 150mm x 100mm.
Please feel free to contact us ,If you have any question:
Attention: PLZ leave your telephone number and address in detail when you take order in our website, it is very important to ship your order. (Customers from Brazil PLZ leave your Cutsom ID also, thanks!)