Scopemeter Specification : | |
Bandwidth (-3dB) | 25MHz |
Sampling Rate | Max 100M Sa/s |
Channel | 1 |
Coupling | AC , DC |
Rise Time | <17.5nS |
Input Impedance | 1MΩ,<=20pF |
Max Input Voltage | CAT II 300V |
Vertical Resolution | 8bit |
Vertical Sensitivity | 50mV / div -20V/div |
Horizontal Resolution | 10nS/div |
Horizontal Sensitivity | 10nS/div - 5S/div |
Record Length | 0.1K/Channel |
Trigger Mode | Auto , Rising edge , Falling edge |
Screen | 128x64, with LED backlight |
Battery | 3.7V lithium battery, about 1000mAH |
Charger | Input Voltage : 100-240V ac , Output: DC5V+-10% , 1000mA |
Size | 174 x 92 x 40 mm |
Weight | 330g |
Display | 6000counts |
Input | Max Input Voltage: CAT II 600V |
Continuity Test | In 600Ω range, beeps at<25Ω |
Diode Test | |
If voltage drop of the diode under test is more than 2V or | |
if input terminals are open, the display will show ”OL”. | |
If voltage drop is less than 0.25V, the built-in buzzer will sound. | |
Capacitance | 6.000Nf-6Mf,7 ranges |
Resistance | 600.0Ω-60.00MΩ,6 ranges |
Voltage | 6V-600V,3 ranges |
Vertical System: channel of scope: | |
Bandwidth (-3Db) | 25MHz |
Accuracy | 50Mv/div: ±3% of full scale |
Vertical Offset Accuracy(DC) | ±0.2div±2mV±0.5% of offset |
Trigger | DC to 20MHz:0.8div |
Specification of probe: | |
Rise Time | X1 23.3ns |
X10 17.5ns | |
Bandwidth | X1 DC to 15 MHz |
X10 DC to 25 MHz | |
Input Impedance | X1 1MΩ |
X10 10MΩ(without scope's input resistance 1 MΩ | |
Input Capacitance | X1 46Pf(without scope's input resistance 1 MΩ) |
X10 about 15pF |
Multimeter Specification Accuracy Form:±(% of reading +digits) | |||
Function | Range | Frequency,Test current,Or load voltage | Condition:at calibration temperature±5degree C,for 1 year |
DC Voltage | 6.000V | ±(0.5%+8) | |
60.000V | ±(0.5%+8) | ||
600.000V | ±(0.5%+8) | ||
AC Voltage | 6.000V-600.0V | 40Hz-400Hz | ±(1.0%+10) |
400Hz-2kHz | ±(5.0%+10) | ||
Resistance | 600.0Ω | ±(1.0%+5) | |
6.000kΩ | ±(1.0%+5) | ||
60.00kΩ | ±(1.0%+5) | ||
600.00kΩ | ±(1.0%+5) | ||
6.000MΩ | ±(1.0%+5) | ||
60.00MΩ | ±(2.0%+5) | ||
Capacitance | 6.000nF | ±(5.0%+8) | |
60.00 nF | ±(3.0%+8) | ||
600.0 nF | ±(3.0%+8) | ||
6000 nF | ±(3.0%+8) | ||
60.00uF | ±(3.0%+8) | ||
600.0uF | ±(5.0%+8) | ||
6.000 mF | ±(8.0%+8) | ||
Diode | 2.000V | Test Current:2mA | Buzzer beeps if the voltage is less than 0.25V. |
Buzzer beeps if the resistance is less than 25Ω. |