Jdiag Elite J2534 Device For Diagnostic And Reprogramming Instructions to diagnose on
Benz W211 vehicle
JDiag is the most validated and accepted J2534 device in the world. It has been on the market longer than any other J2534
device, it has been approved by more automakers than any other product, and has been called the "golden standard" by
customers and competitors alike.
When you want to use Jdiag Elite J2534 to diagnose Benz W211 , you can check the details operation steps as bellow :
1.Open DAS/Xentry
2. Connect USB cable to laptop, OBDII cable to car OBDII port.
3. Switch the ignition on
4. Go to test it, details as follows.
5. Press “F2”, Data are being determined, please wait.
Select “Cars”, click “F2”
6. Select “E-class/CLS”
7. Select W211
8.Wait…it will automatically initializing, checking….
9. Select “Control units”, data are being determined, please wait…
10. Select “Drive”
11. select ME-SF 2/8-Motor electronics 2.8-07, communication with the control module group gasoline engine is being established.
12. I herewith confirm that I have read the safety notes
13. Select “control unit version”
14. Select “actual values”
15. Select “preconditions for test”
16. Check engine at cold start and in warming-up phase
Someone will be know Autel MS908Pro which can do programming too , we just have discount price for 908pro recently , and as a
special advantage , our company will offer one more year free update to our customers , if you have any interesting , please check
the information for it here .
