SuperOBD SKP-900 Hand-held OBD2 Auto Key Programmer update instructions
As we all know that that SKP900 is a professional key programmer supporting almost all vehicles in the world without pincode. And it has been updated to the newest V2.8, while there still have some owners who are not familiar with the update process.
If you dont know how to do , please check as following :
Download Update Tool and Update File
1. In http://www.superobd.com, register to be a member.
2. In your member center, register for your SKP-900.
3. Then download the Update File in your member center, and to unzip it to get the Update Bin File.
4. Download the Update tool.
Perform the Update Steps
5. Use the USB cable to connect SKP-900 with the computer.
6. Operate the Update Tool, then click OPEN to open the Update Bin File.
7. Click Auto Scan Port to setup the COM Port.
8. Select UPDATE to start update.
Notice: According to my own experience, the whole process needs to cost about half an hour Do not Disconnect the SKP-900 while updating..
