DigiProg 3 V4.94 Yamaha R1 2001 93C46 Odometer Programming Tutorial

Hello, guys. I made a small instruction here for you all on how to correct or change the mileage of Yamaha YZF R1 2001 93C46 EEPROM chip using Digiprog 3 odometer programmer

Disclaimer:
The guide is only for educational purposes and not by any means to be wrongly or criminally used for cheating or manipulating with cars mileage for sales purposes

Tool used:
Digiprog 3 v4.94+ ST01/ST04 Cable

DigiProg3 Yamaha R1 2001 93C46 1

Two parts of DigiProg3 Yamaha R1 2001 93C46 Mileage Correction:

Part 1:

Take apart the EEPROM chip Yamaha YZF-R1 93C46.

You can take a close look at as below:

In this case, you need the ST04 cable to connect 93C46 EEPROM chip with Digiprog iii.

Fit the chip with ST04 cable clip properly like this:

Connect ST04 cable with Digiprog iii and connect device to power supply.

Part 2

The device will power on. You will see an information message, click OK.

Input your device password to enter the main menu.

Go to “MOTORCYCLE” section

Scroll down to select “YAMAHA”, “YZF R1” then “C46 (2001)”.

It will show “93CS46 PLUG 1”, click OK to continue.

Step 3

You can see the old odometer value as 27584KM.

And just enter a new value like 40000KM, click OK and confirm it again.

 

Now you change Yamaha R1 mileage successfully using Digiprog iii

Digiprog 3 V4.94 car list of YAMAHA:
YAMAHA
FAZER
MT03 24C04
TMAX 500 C46
WILD STAR C46
XV 1900 93CS66
YZF R1
C46 2001
C56 2002
L56R 2005
YZF R6 C46