Clearing fault codes on a John Deere skid steer can be done using the following steps:
1. Turn off the skid steer and remove the key from the ignition.
2. Locate the diagnostic connector under the dash of the skid steer. It should be a black, rectangular connector with two rows of pins.
3. Connect the diagnostic tool to the connector. The tool should be compatible with John Deere machinery and have the capability to read and clear fault codes.
4. Turn on the diagnostic tool and select the option to clear fault codes.
5. Follow the instructions provided by the diagnostic tool to clear the fault codes from the skid steer.
6. Once the codes have been cleared, turn off the diagnostic tool and disconnect it from the connector.
7. Turn on the skid steer and verify that the fault codes have been successfully cleared.
Related product
John Deere Service Advisor
It is important to note that clearing fault codes should only be done after the underlying issue has been addressed and repaired. If the issue is not addressed, the fault codes will likely reappear. Additionally, it is important to use caution when working with diagnostic tools and to follow all safety precautions outlined in the skid steer’s manual.