Here offer the newest Autel IM508/IM608 VAG IMMO function list.
Something important to know!
1.For VW IMMO IV:
Go to Volkswagen–>Advanced Mode–>IMMO 4 Instrument CAN pay per use, 10 dollars for key adding and all key lost by OBD.
As long as it is VAG IMMO IV, no matter what year and model of the vehicle are. (Note: except for illegal vehicle data) 2.IMMO IV+MQB key support key adding and all key lost. (support the latest PASSAT, Jetta, support latest Passat, Beetle after year 2017, Multivan, Tiguan, Sharan key adding and all key lost by OBD）（Note: Except for illegal vehicle data）
3.“MQB Instrument for VW and Audi” support all Continental VDO, Johnson JCI instrument, full liquid crystal MQB instrument；MQB instrument all key lost (latest model with 49 or 5C key chip type is not supported.) Skoda supports all Continental VDO and full liquid crystal MQB instrument，Doesn’t support Johnson control instrument(JCI). Adding key for free, all key lost is not supported.
4.“Fail to enter the service mode or fail to read IMMO data” normally this problem can be solved by going to “advanced mode”. If it can’t be solved, please contact the technical support.
Autel MaxiIM IM508/Autel IM608 VAG IMMO Function List:
|
VAG Function lists (IMMO III, IMMO IV,IMMO IV+MQB key, IMMO V) |
|||||||||||
|
Models |
Instrument type |
add key |
all key lost |
replace component |
Remark |
||||||
|
Lavida |
VDO CDC32xx+24C32 before 2013 IMMO III and half |
read engine by OBD |
Need engine to support this function, manually input cs code. |
supported |
Instrument type：VDO CDC32xx+24C32. If cannot read instrument, select expert mode—>CAN instrument—>auto detection—> read engine IMMO data—>search for 7th byte |
||||||
|
2013-2014 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Lavida/Gran Lavida/Lang |
year after 2015; IMMO 4 Instrument CAN |
read instrument by OBD |
(advanced mode pay-per-use）read instrument by OBD |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. |
|
|
|
|
|
|
|
Jetta |
1999~2006IMMO III |
unsupported（remove immobilizer box） |
unsupported（remove immobilizer box） |
unsupported |
|
|
|
|
|
|
|
|
2006~2010IMMO III |
read instrument by OBD/engine |
Same as key adding |
engine/instrument |
|
|
|
|
|
|
|
|
|
2010~2013IMMO III and half |
supported（need to get PIN code from dealer） |
supported（need to get PIN code from dealer） |
supported |
Jumper wire connects engine to get IMMMO data.(direct method) |
|
|
|
|
|
|
|
|
2013~2014 IMMO IV Instrument |
read instrument by OBD |
OBD modify the vehicle IMMO data by OBD |
engine/instrument |
|
|
|
|
|
|
|
|
|
year after 2013 IMMO IV Instrument CAN |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
unsupported |
|
|
|
|
|
|
|
|
|
SAGITAR |
Before 2010 IMMO III and half |
read instrument by OBD |
read instrument by OBD |
supported |
Instrument type：VDO CDC32xx+24C32 if can not read instrument，select expert mode—>CAN instrument—>auto detection—> read engine IMMO data—>search for 7th byte |
|
|
|
|
|
|
|
2011~2014 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
engine/instrument |
|
|
|
|
|
|
|
|
|
After 2015 IMMO 4 Instrument CAN |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform all key lost by OBD. |
unsupported |
|
|
|
|
|
|
|
|
|
Santana 2000/3000 |
Before 2009 IMMO III |
1.read immobilizerby OBD 2.read engine by OBD（need engine to support this function） |
Same as key adding |
engine/instrument |
|
|
|
|
|
|
|
|
Santana |
After 2009 IMMO III and half |
1.read immobilizer/engine(need immobilizer &engine to support this function) 2.remove immobilizer (dump mode) |
same as key adding |
supported |
|
|
|
|
|
|
|
|
2013~2014 IMMO IV |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD or dump mode. |
engine/instrument |
|
|
|
|
|
|
|
|
|
After 2015 IMMO IV |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
engine/instrument |
|
|
|
|
|
|
|
|
|
Golf 4 |
Before 2009 IMMO III |
read instrument by OBD/engine |
Same as key adding |
engine/instrument |
|
|
|
|
|
|
|
|
Golf 6 |
2009~2013 IMMO IV |
read instrument by OBD |
Same as key adding |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
POLO |
Before 2011 IMMO III |
1.read immobilizerby OBD 2.read engine by OBD |
Same as key adding |
supported |
|
|
|
|
|
|
|
|
2011~2014 IMMO IV |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD/dumpe mode with instrument |
engine/instrument |
|
|
|
|
|
|
|
|
|
After 2015 IMMO IV |
read instrument by OBD |
go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
unsupported |
|
|
|
|
|
|
|
|
|
Passat |
Before 2012 IMMO III |
1.read immobilizer by OBD 2.read engine by OBD |
Same as key adding |
supported |
|
|
|
|
|
|
|
|
2012~2015 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
engine/instrument |
|
|
|
|
|
|
|
|
|
Bora |
before 2008 IMMO III |
1.read immobilizerby OBD 2.read engine by OBD |
Same as key adding |
supported |
|
|
|
|
|
|
|
|
2009~2014 IMMO IV |
read instrument by OBD |
dump mode with instrument/Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
engine/instrument |
|
|
|
|
|
|
|
|
|
After 2015 IMMO IV |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
engine/instrument |
. |
|
|
|
|
|
|
|
|
Passat B6/CC |
2006~2016 Comfort module |
1.read engine by OBD 2.connect to the gateway |
dump mode with comfort module https://www.youtube.com/watch?v=Kamu0RN-qGE |
engine/comfort module |
For 46 key chip, only 6bytes are needed, the 7th byte can be replaced by FF. For 48 key chip, the 7 bytes are needed. |
|
|
|
|
|
|
|
Tiguan |
2010~2013 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
After 2013 IMMO IV |
read instrument by OBD |
(advanced mode pay-per-use）read instrument by OBD |
before 2014 support engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Touran |
VDO CDC32xx+24C32 Before 2011 IMMO III and half |
1.read instrument by OBD 2.read engine by OBD（need engine to support this function）+search for 7th byte |
1.read instrument by OBD 2.modify the vehicle IMMO data by OBD（need engine to support this function） 3.dump mode with instrument |
supported |
|
|
|
|
|
|
|
|
2012~2015 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Touareg |
2003~2010 KESSY |
1.read engine by OBD（need engine to support this function）+search for 7th byte 2.dump mode with KESSY |
dump mode with KESSY |
engine/KESSY（some are unsupported） |
|
|
|
|
|
|
|
|
2011~2017 IMMO V |
Read BCM2 by OBD |
currently unsupported |
currently unsupported |
|
|
|
|
|
|
|
|
|
Phaeton |
Before 2012 KESSY |
1.read engine by OBD（need engine to support this function）+search for 7th byte 2.dump mode with KESSY（some are unsupported） |
remove the chip of KESSY（some are unsupported） |
engine/KESSY（some are unsupported） |
|
|
|
|
|
|
|
|
Sharan |
2001~2010 IMMO III |
1.read instrument by OBD 2.read engine by OBD（need engine to support this function） |
same as key adding |
supported |
|
|
|
|
|
|
|
|
2011~2015 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD(need engine to support this function) |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Caddy |
2005~2009 IMMO III and half |
1.read instrument by OBD 2.read engine by OBD（need engine to support this function）+search for 7th byte |
1.same as key adding 2.dump mode with instrument 3.modify the vehicle IMMO data by OBD（need engine to support this function） |
supported |
|
|
|
|
|
|
|
|
Beetle |
2003~2011 IMMO III |
read engine by OBD（some need to do with dump mode(Currently no supported)） |
same as key adding |
supported |
|
|
|
|
|
|
|
|
2012~2015 IMMO IV |
read instrument by OBD |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
engine/instrument |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Atlas |
After 2016 IMMO V |
Read BCM2 by OBD |
After 2015, all key lost is unsupported |
currently unsupported |
|
|
|
|
|
|
|
|
Multivan |
2014~2016 IMMO IV |
read instrument by OBD |
dump mode with instrument/modify the vehicle IMMO data by OBD |
some are supported |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
after 2017 IMMO IV+MQB key |
read instrument by OBD |
Same as key adding |
unsupported |
Go to “advanced mode”–>”IMMO 4+MQB Key” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
|
Sharan |
after 2017 IMMO IV+MQB key |
read instrument by OBD |
Same as key adding |
unsupported |
Go to “advanced mode”–>”IMMO 4+MQB Key” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
Tiguan |
after 2016 IMMO IV IMMO IV+MQB key |
read instrument by OBD |
Same as key adding |
unsupported |
Go to “advanced mode”–>”IMMO 4 Instrument CAN” or “IMMO 4+ MQB Key”to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
Passat |
after 2016 IMMO IV IMMO IV+MQB key |
read instrument by OBD |
Same as key adding |
unsupported |
1.After 2015 VDO NEC+24C64 2014 instrument, can be done with smart mode, expert mode and manual selection. 2.Go to “advanced mode”–>”IMMO 4 Instrument CAN” or “IMMO 4+ MQB Key”to perform key adding and all key lost by OBD. |
|
|
|
|
|
|
|
Beetle |
After 2015 IMMO IV IMMO IV+MQB key |
read instrument by OBD |
Same as key adding |
unsupported |
1.After 2015 VDO NEC+24C64 2014 instrument can be done with smart mode, expert mode and manual selection. 2.go to advanced mode–>”IMMO 4 Instrument CAN” or “IMMO 4+MQB key” to perform key adding and all key lost by OBD. |
|
|
|
|
|
|